Todas las entradas en greenhouse

Features of Allergic Harvest PC

Posted by / 18 marzo, 2021 / Categories: greenhouse / -

The comprehensive set for the building of a 4-meter greenhouse 3 sheets of cellular polycarbonate in the kind of rolls of 2.1 m in length and a diameter of 60-90 cm. The depth of the substance is 4 mm.

If you would like, you are able to increase the distance of the structure to 6 metres or more. To do this, it is enough to attach a two-meter extension. When selecting a drawing, pay attention to the space between the arches. This figure should be 65 cm, and that’s the most appropriate length for the specified thickness of the substance. The width of the doorways according to the maker’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, then it is necessary to pick a place for the place. If that is done properly, you can provide yourself with a harvest of fresh veggies for the entire year.

The location for your upcoming greenhouse is marked immediately in the planning of their garden plot. In order to melt the snow in the positioning of their greenhouse as early as possible, the ideal point on the site will be a small elevation. Additionally, in this place is not going to have to be worried about higher humidity as soil and air within the structure.

Build a polycarbonate greenhouse on a raised site – means to look after the optimal temperature inside.

If it isn’t possible to place a greenhouse in an elevated place, you’ll have to pour a layer of fine shattered rock around 20 cm and the same layer of fertile soil to create seedbeds.

Before building a greenhouse in your garden plot, you should also consider where and how this structure will be set up. To begin with, you have to pick a location for it. The greenhouse should be located at a metropolitan region no less than a few meters away from houses, barns and other structures.

How to Put in a greenhouse according to the Faces of the world

Be sure to measure the soil surface – it is best to even remove the top layer. This will also get rid of weed seeds. And for simplicity of work, remove the soil in an area that’s around a meter wider on each side of the rectangle you want.

Additionally, it is worth considering using a base. As producers say, now most greenhouses don’t need that, especially if they (greenhouses) are used just in the summer and spring time. But, experienced gardeners still suggest making at least an elementary foundation from a pub. It is quite simple – it’s enough to connect with each other using metal corners and screws four pieces of wood using a cross-section of 10 * 10 cm. The size of such a base should be equal to the base of the upcoming greenhouse.

Simple bar foundation

You might even produce a strip base of concrete. He’s more gidpostroy.ru dependable than a pub foundation, but demands greater financial and labour costs. By the way, the greenhouse, that is utilised in winter, without it and don’t do with it at all.

Stages of the creation of a strip base: a schematic representation

Many producers advise to install greenhouse structures without creating a base. Even for this function, they equip the frame with special T-shaped legs, so that the construction was securely fixed. But, as practice shows, it is still crucial to build a base: so and the foundation will be more securely fixed and also the components of the basis that are in touch with the ground, will be saved much more in its original condition.

The principal thing is to treat the material with specific agents to protect the timber from moisture. The substance is normally installed on concrete blocks which are dug into the ground. For a six-meter structure, they want 10 bits: four on either side and one in the center of the ends.

Before you do the greenhouse itself, you need to pick the perfect place for this. It has to be an even website, so that the framework was located evenly, without distortions. It needs to be sunny and not obscured by trees or buildings.