Todas las entradas en laying

Technology of Placing gypsum tiles with your own hands

Posted by / 18 marzo, 2021 / Categories: laying / -

Gypsum tiles must be laid correctly, as not only the aesthetic look of cosmetic facing, but also the service quality of this

masterfasada.ru

material will be dependent on the technologies of work. The product is more also universal, and it can be attached to plaster,

concrete, brick or gypsum board sheets, and provided the surface of the foundation is even and has no defects.

If the flaws of this foundation are important, it should be completely treated with primer, and then a cement mortar is made,

which satisfies all of the cracks. Then the surface should be primed and dried. Primer therapy is necessary to improve the bond

between the tile and the wall. In cases like this, its composition should choose a particular, containing elements that prevent

the appearance of fungus and mold.

In the modern interior of these rooms most frequently used gypsum tiles, even imitating natural brick or stone. To execute

decorative finishing your self, it’s essential first of all to choose a strategy of tile placement and prepare a solution. It is

important to look closely at the opposite side of the substance. When its surface includes an embossed surface, then the glue

ought to be placed having an even trowel, also if it is even, then with a top notch one.

The technologies of the job is as follows:

* A thin layer of adhesive is applied to the pre-prepared wall. It is distributed over the bottom so that it is possible to put

4-5 tiles. Decorative cladding can be put both on plasterboard, also on putty.

* Glue the back side of these tiles with adhesive.

* Plaster components are pushed against the wall and their place is adjusted. To align with the seams, it is recommended to use

spacers.

* Finishing is performed in rows, all which should be changed by half a tile. Facing is carried out to the corners of this

space, then immediately remove any remaining mortar at the joints.

Drying the walls requires no longer than a day also requires a continuous humidity and temperature in the room. The last point in

the laying of gypsum tiles is the decoration. To do this, the joints between these components are filled with a special solution,

the color of which matches the brick.

Decorative imitation of brickwork around the walls will be completed in the following manners:

* Cutting on the plastered surface of the seams of masonry using a bolt cutter with your own hands;

* placing of tiles beneath the brick:

* mimicking the structure and color of the side surface of one brick;

* Imitating a fragment of brickwork of many bricks.

The very best method to decorate”under the brick” would be the one that allows you to create a usable coating together with the

most look of its resemblance to natural masonry. All 3 methods to perform this kind of finishing functions meet the requirements,

but the cutting edge of joints with a bolt is labor-intensive as well as the formation of considerable amounts of dust, so let’s

consider more typical manners.

The old finish is removed from the walls, and the outside, if needed, is leveled to get rid of the need to glue plaster onto a

thick layer of glue.

Combining such cladding with other types of interior finishes can be both systematic and done with no clear consequences,

chaotically, together with imitation of signs of aging.

With the help of decorative gypsum tiles it is possible to mimic a lot of textures.

A large number of textures may be imitated with the help of decorative gypsum tiles.

The wall where it’s to be set up must have the following characteristics:

* Hardness and strength of the surface;

* The lack of irregular places and sharp gaps;

* no more deformations.

Cosmetic tiles in the interior of this kitchen

Walls are made from a variety of substances, so let us break down the principles of setup.

When dealing with concrete, there will be no huge problems. It is simply essential to take into consideration the porosity of the

material. Concrete, which has practically no pronounced pores, ought to be treated with a good primer.

Mounting gypsum tiles on concrete

Before starting work on the setup of gypsum tiles on the walls, then it’s well worth assessing the strength of their surface.

After the plaster does not drop off the wall and at the same time holds well, it is possible to simply paint it using primer.

Mount the tiles onto the painted concrete should not. The surface ought to be scratched, ensuring to misfire, then it ought to be

grouted and covered with a layer of plaster.